Numerical and experimental analysis of the energy performance of an air-source heat pump (ASHP) coupled with a horizontal earth-to-air heat exchanger (EAHX) in different climates

Geothermal energy has a huge potential in building applications. This paper proposes the use of an Air-Source Heat Pump (ASHP) system coupled with a Horizontal Earth-To-Air Heat Exchanger (EAHX) to reduce energy consumption in buildings. The novelty is to geothermally pre-heat or pre-cool the air source of the ASHP through the EAHX, reducing the electric power needed, keeping constant heating/cooling capacity. The behaviour of ASHP-EAHX system has been investigated by a numerical model implemented in TRNSYS. A total of 54 combinations have been obtained and tested varying ground thermal properties, burial depth, air flow rate and pipe length. The model has been validated with a real case showing a good agreement between simulated and monitored data. The study is focused on the city of Turin (North of Italy), compared with Brindisi (South of Italy), and extremely cold and hot climates like Tromso (Norway) and Bechar (Algeria), respectively. The ASHP-EAXH performance has been investigated, by the comparison with the traditional ASHP, using different coefficients, such as the Coefficient of Performance (COP), the Energy Efficiency Ratio (EER), the Seasonal Coefficient of Performance (SCOP), and the Seasonal Energy Efficiency Ratio (SEER). The paper reveals how the ASHP-EAHX system show higher performance compared to the traditional ASHP, in all seasons. The overall merit is, for cold extremely climate, the reduction of the shutdown periods, when the outside temperature is below the limit operating temperature, and to allow the extension of the use of the heat pump to locations, where it is currently not convenient for the average outside temperature lower than the limit operating temperature of the heat pump.