Seismic performance of magnetorheological damped structures with different MR fluid perfusion densities of the damper

Performance tests of magnetorheological (MR) dampers show that the hysteresis curves generally show an obvious force–lag phenomenon, which is due to the presence of trapped air in the working chamber of the damper. However, the force–lag phenomenon is barely considered in existing studies, and its influence on the seismic performance of MR damped structures is still unclear. In this paper, experimental and theoretical research have been carried out to analyze the force–lag phenomenon and its influence. Firstly, a specially designed MR damper was manufactured so that MR fluid can be poured into the damper successively for several times until the working chamber was filled, and performance tests were carried out correspondingly with different MR fluid perfusion densities (a parameter introduced in this paper to describe the volume fraction of MR fluid in the working chamber). The mechanical properties of the MR damper under different MR fluid perfusion densities were compared to reveal the influence of the force–lag phenomenon. Then, the effects of excitation properties on the force–lag phenomenon were discussed by comparing experiments results under different currents, frequencies and displacement amplitudes. Further, a force–lag mathematical model was proposed by considering the variation of the force-lag part with MR fluid perfusion density to reflect the force–lag phenomenon with different volume fractions of trapped air, and then verified based on the performance test data. Finally, numerical analysis of MR damped structures with different MR fluid perfusion densities was performed using the proposed force–lag mathematical model. Results show that the damping effect of MR control systems will be weaken due to the force–lag phenomenon, and with the increase of the MR fluid perfusion density, the seismic performance of MR damped structures will gradually improve.