Simulation of the flow and thermal breakthrough of a forced external circulation standing column well

The flow and thermal breakthrough phenomenon in a forced external circulation standing column well (FECSCW) directly affects heat transfer efficiency and load-carrying capacity. A numerical model for FECSCW is developed to analyze the migration of the temperature and velocity front under the flow and thermal breakthrough. The results indicated that thermal breakthrough began after simulation running 2.5 min and was completely formed after 12 min. The inlet water, which directly entered the production well without heat exchange with the aquifer, accounted for 12.8%. When the porosity of the backfill material decreased from 0.35 to 0, the coefficient of performance (COP) of the heat pump unit increased by 1.6% on average, and the thermal breakthrough strength decreased by an average of 45.3% within 25 min. Where seepage velocity near the well wall was greater than 1 × 10−3 m•s−1, faster velocity front migration was observed, while the migration advantage of the temperature front was more prominent outside of this region. Through quantitative analysis of flow and thermal breakthrough, temperature and velocity front migration, and COP change of heat pump unit, theoretical suggestions were provided for the thermal transfer mechanism near the thermal well wall. The extended research in this study can be applied to the design and optimization of forced external circulation standing column well system.