Comparing predicted performance of anechoic chambers to free space VSWR measurements

Indoor antenna ranges must have the walls, floor and ceiling treated with RF absorber. The normal incidence performance of the absorber is usually provided by the manufacturers of the materials; however, the bi-static or off angle performance must also be known. In reference [1], a polynomial approximation was introduced that gave a prediction of the reflected energy from pyramidal absorber. In this paper, the approximations are used to predict the quiet zone (QZ) performance of several anechoic chambers. These predictions are compared with full wave analysis performed in CST Suite®. A 12 m wide by 22 m long with a height of 12 m chamber was analyzed at 700 MHz. The QZ performance was compared to the polynomial predictions showing a difference of less than 2.2 dB. In addition, comparisons are made with measurements of the QZ performance of anechoic chambers. Measurements performed per the free space VSWR method of three different chambers are compared with the prediction that uses the polynomials presented in [1]. The chambers are: a 18 m long by 11.5 m wide and 11.5 m in height operating from 100M MHz to 12 GHz; a 13.41 m by6.1 m by 6.1 m operating from 800 MHz to 6 GHz; and a 14 m long by 4.12 m by 4.27 m operating in the X band. The results show that the polynomial approximations can be used to give a reasonably accurate and safe prediction of the QZ performance of anechoic chambers.