Preparation of Castor Oil-Based Waterborne Polyurethane and its Application in Electrostatic Copy Paper Surface Enhancing

In order to prepare the polyurethane with less reliance on the oil resources, natural, renewable castor oil was used as raw materials to replace the traditional oil type polyols. The castor oil-based waterborne polyurethane was synthesized by the reaction of toluene diisocyanate (TDI), castor oil (C.O.), dimethylol propionic acid (DMPA) and triethyl amine (TEA). The results revealed that the best paper surface strength properties could be obtained under the condition that the mole ratio of TDI to C.O. was 3.0, prepolymerization temperature was 75°C and dosage of hydrophilic chain extender DMPA was 12.1%. In addition, picking speed of paper surface sized by this emulsion increased 2.53 times compared to the unsized paper, from 0.81m/s to 2.86 m/s, Printing ink absorption value and PPS value reduced in a reasonable scope, 60 s Cobb value was below 30 g/m2.