Three-dimensionally printed polyetherketoneketone scaffolds with mesenchymal stem cells for the reconstruction of critical-sized mandibular defects

Objective Additive manufacturing offers a tailored approach to tissue engineering by providing anatomically precise scaffolds onto which stem cells and growth factors can be supplied. Polyetherketoneketone (PEKK), an ideal candidate biomaterial, is limited by a poor implant–bone interface but can be functionalized with adipose-derived stem cells (ADSC) to promote integration. This in vivo study examined the interaction of a three-dimensional printed PEKK/ADSC implant within the critical-sized mandibular defect in a rabbit model. Study Design/Methods Trapezoidal porous scaffolds with dimensions of 1.5 × 1.0 × 0.5 cm were printed using selective laser sintering. ADSCs were seeded on the scaffolds that were then implanted in marginal defects created in New Zealand rabbits. Rabbits were euthanized at 10- and 20-week intervals. Microcomputed tomography was used to characterize bone ingrowth and was correlated with histological analysis. Stress testing was performed on the scaffolds before and after implantation. Results All scaffolds were well integrated into adjacent bone. Bone-to-tissue volume increased from 30.34% ( ± 12.46) to 61.27% ( ± 8.24), and trabecular thickness increased from 0.178 mm ( ± 0.069) to 0.331 mm ( ± 0.0306) in the 10- and 20-week groups, respectively, compared to no bone regrowth on the control side (P