Optimization studies of a Compton suppression spectrometer using experimentally validated Monte Carlo simulations

Recent developments associated with room temperature semiconductor detectors and inorganic scintillators suggest that these detectors may be viable alternatives for the primary detector in a Compton suppression spectrometer (CSS). The room temperature operation of these detectors allows removal of a substantial amount of material from between primary and secondary detector and, if properly designed should afford substantially better suppression factors than can be achieved by germanium-based spectrometers. We have chosen to study the optimum properties of a CSS with a LaX3:Ce scintillator (where X is chloride or bromide) as the primary gamma ray detector. A Monte Carlo photon transport model is used to determine the optimum geometric properties of this spectrometer. To validate the assumptions and basic design of the Monte Carlo simulations, the energy distribution of a 137Cs point source is measured and simulated for two experimental systems. Comparison of the suppression factors for the measured and simulated data validates the model accuracy. A range of CSS physical parameters are studied to determine optimal detector geometry and to maximize the Compton suppression factor. These physical parameters and their optimum values are discussed