The impacts of LPCVD wrap-around on the performance of n-type tunnel oxide passivated contact c-Si solar cell

In this paper, Tunnel Oxide Passivated Contact (TOPCon) silicon solar cells with the industrial area (244.32 cm2) are fabricated on N-type silicon substrates. Both the ultra-thin tunnel oxide layer and phosphorus doped polycrystalline silicon (polysilicon) thin film are prepared by the LPCVD system. The wrap-around of polysilicon is observed on the surface of borosilicate glass (BSG). The polysilicon wrap-around can form a leakage current path, thus degrades the shunt resistance of solar cells, and leads to the degradation of solar cell efficiency. Different methods are adopted to treat the polysilicon wrap-around and improve shunt resistance of solar cells. The experimental results indicate that a chemical etching method can effectively solve the problem of polysilicon wrap-around and improve the performance of solar cells. Finally, a conversion efficiency of 22.81% has been achieved by our bifacial TOPCon solar cells, with Voc of 702.6 mV, Jsc of 39.78 mA/cm2 and FF of 81.62%.