Evaluation of Ti/Pt Anode Efficiency and Energy Consumption in Turbidity and Suspended Solids Removal from Paper Industry Wastewater: The Effect of pH and Support Electrolyte Type

In the research, different experimental setups were used to examine the treatment of wastewater from the paper industry using the electrooxidation method, one of the electrochemical treatment methods in the batch system. In the 2000 mL volume jacketed glass reactor utilized for the treatment of wastewater from the paper industry, 4 anode and 4 cathode sieve type plates of 7 cm x 10 cm dimensions were positioned at 0.5 cm intervals, and 1200 mL wastewater was used in the tests. Coated sieve type Ti/Pt electrodes were employed as the anode in the electrooxidation studies, and uncoated sieve type Ti electrodes were used as the cathode. It was determined that the active anodic wet surface area was 1078 cm2 . The removal rates of pollutant parameters such as turbidity and SS (Suspended Solids) in the experiments; the effects of wastewater initial pH value and supporting electrolyte type parameters were investigated. According to the results, the most effective pH value for Ti/Pt anode type at 400 rpm mixing speed was determined to be waste water natural pH (7.5), and 0.50 M NaCl was the most successful supporting electrolyte type. 96.92% Suspended Solids removal efficiency and 95.38% turbidity removal efficiency for Ti/Pt anode were achieved under ideal conditions. In addition, 312.05 kW-hour/kg COD is determined as the energy consumption value.