Dynamic pressure in mould flux channel during mould non-sinusoidal oscillation

Based on the lubrication theory of mould flux, a mathematical model of dynamic pressure in mould flux channel was developed, and the distribution of dynamic pressure and its variation during non-sinusoidal oscillation were investigated. The effects of casting speed and non-sinusoidal oscillation parameters, including the degree of non-sinusoidal operation (non-sinusoidal factor), amplitude and frequency of oscillation on the dynamic pressure in the mould flux channel, were studied. The results indicate that the maximum negative pressure is decreased, and the maximum positive pressure is increased with increasing non-sinusoidal factor. The optimum value of non-sinusoidal factor is ∼0·2. With increasing amplitude and frequency of oscillation, both the negative and positive pressure are increased; moreover, the increment of positive pressure is obviously greater than that of negative pressure; especially when the oscillation frequency is increased, the increment of negative pressure is very little. W...