Kinetic modelling of pyrolysis of cellulose using CPD model: effect of salt

In this work, effect of salt on cellulose pyrolysis behaviour using chemical percolation devolatilization (CPD) model has been investigated. The distributed activation energy model (DAEM) has been used to determine the kinetics of pure and NaCl-loaded cellulose pyrolysis in a thermogravimetric analyser (TGA). A number of these experiments were performed for a range of heating rates (5–100 °C min−1) and for different concentrations of NaCl in cellulose (0.25–2 mass/%) which showed a pronounced effect of salt on the primary pyrolysis reactions of cellulose. These data were then used in a two-component DAEM to calculate the kinetic parameters for the chemical percolation devolatilization model (CPD) for both pure and NaCl-loaded cellulose. The optimized kinetic parameters for the pure and NaCl-loaded cellulose were used in the CPD model, and the product yield was predicted. The CPD predictions showed that the fraction of gases and char in the pyrolysis products increased in the presence of salt. The amount of char for pure cellulose was 6.97% which increased to 16.4% in the presence of 0.25% NaCl. The amount of gases produced as a result of pure cellulose pyrolysis was 9.63% and this amount increased with addition of NaCl to 22.85% and then further increases with an increase in NaCl concentration. Amount of tar produced for pure cellulose was 83.4%, and this amount reduced to 60.7% with addition of 0.25% NaCl. The presence of NaCl accelerates cellulose decomposition and favours the formation of gases and char.