Use of a pin-penetration wood density meter to determine the density of 25 Indonesian species

The pin-penetration device is a minimally destructive instrument that is widely used to estimate the physical properties of wood, e.g., density, with advantages such as reduced testing times, low costs, and fewer defects induced in the wood being tested. In this study, such a device was used on 25 Indonesian hardwood species with a strength class (SC) distribution from SC II to IV (according to the Indonesian classification of wood SCs). Tests were conducted on three different orthogonal planes, i.e., cross-sectional, radial, and tangential planes. The wood density ranged from 0.28 to 0.88 g/cm3, and the specific gravity was 0.25 to 0.76. The cross-sectional plane penetration depth of the wood was significantly greater than that of either the radial or tangential plane, whereas the pin penetration values of the radial and tangential planes were not significantly different. A prediction model for predicting the density and specific gravity of wood via pin penetration showed a significant regression. Thus, the use of a pin-penetration device was found to be suitable for estimating wood density and specific gravity in a range of SCs of tropical wood species regardless of species.