MULTI-SITE AEROSOL MONITORING USING MINI STEP SAMPLER

We developed mini step samplers with low manufacturing and running costs for application in multi-site air-pollution monitoring. The miniaturization of the sampler was achieved by reducing the suction nozzle size. We tested the samplers with suction nozzle diameters of 2 and 4 mm through simultaneous exposure in the same site. Elemental concentrations of aerosol collected by these samplers were consistent within ±20% during comparison and the sample uniformity did not differ significantly. Sampling with small suction nozzle did not adversely affect aerosol collection. Aerosol samples were collected simultaneously at two sites in our laboratory and in the hall outside for 3 days and analyzed subsequently by PIXE. The time variation of elemental concentrations was high during daytime and low at night time and also during the weekend. Elemental concentrations in the hall were always higher than those in the laboratory. In our laboratory, we change shoes at the entrance and therefore, elemental concentrations inside the lab are lower than in the hall. In a second field experiment, we carried out simultaneous multi-site aerosol sampling during two periods in correlation with meteorological data (wind direction and velocity). It was observed that elemental concentrations of some soil origin elements changed periodically. On the other hand, the concentration of Cu and Zn showed irregular concentration spikes whose pattern showed a variation with the sites. Analysis using the data of wind directions showed that Cu had been transported to the sites from northeasterly direction and that the concentration of Zn was influenced by two big factories nearby. In conclusion, it has been demonstrated that the multi-site sampling system combined with meteorological data is well suited to identify sources of pollution.