Monovalent/Divalent salts separation via thin film nanocomposite nanofiltration membrane containing aminated TiO2 nanoparticles

Nanofiltration is widely used in separation of ions with different sizes and charges. However, thin-film composite nanofiltration membrane is hard to reach satisfied selectivity for monovalent ions from divalent ions. In this study, polyamide thin film nanocomposite (TFN) nanofiltration membranes were prepared via interfacial polymerization of piperazine and trimesoyl chloride on a PES substrate by incorporation of aminated titanium dioxide (APTES-TiO2). Surface morphology, roughness of the TFN membranes with varied concentration of aminated TiO2 were tested by SEM, AFM and Zeta analysis. The results showed membrane containing 0.3(w/v%) amino-modified titanium dioxide with ion-selective properties had greatly improved pure water flux while the Na2SO4 rejection keeps at a relative high level (>95%). For the separation of single salt solution, 0.3(w/v%) TFN has a higher rejection for sodium chloride (23.2%) and sodium sulfate (99.7%). For monovalent/divalent mixed salt solution has a separation factor of 477.89 in terms of chloride ion (Cl−) and sulfate (SO42−) in the mixed solution with a salt concentration ratio of 1:19, which was higher than that of the conventional commercial NF membranes, such as Desal-DL, NF 270. This method provides the possibility of recovering concentrated brine and industrial separation of monovalent and divalent ions.