Back to Search
Start Over
CFD simulation of vortex flashing R134a flow expanded through convergent-divergent nozzles
- Source :
- International Journal of Refrigeration. 112:56-68
- Publication Year :
- 2020
- Publisher :
- Elsevier BV, 2020.
-
Abstract
- Vortex control is a novel two-phase convergent-divergent nozzle restrictiveness control mechanism. The flow control is achieved by adjustable nozzle inlet vortex strength. The underlying mechanism behind vortex control is still unclear. In this study, 3D CFD simulations of vortex flashing R134a flows in convergent-divergent nozzles have been conducted. Good agreement was found between the simulation and experimental results. When there is no vortex applied, the void fraction at the nozzle center remains low. When the vortex is applied, vapor bubbles are driven towards the nozzle center. The applied vortex significantly increases the interphase mass transfer near the nozzle outlet with more uniform interfacial area per unit volume and better utilization of liquid superheats at the nozzle center for evaporation. Thus, after the introduction of inlet vortex, more vapor is generated in the divergent part of the nozzle. As a result, the pressure drop across the divergent part of the nozzle is increased. There is negligible vapor content upstream of the throat even though the pressure is already below saturation pressure. When the inlet vortex is applied, with elevated pressure at the nozzle throat and constant inlet conditions, the pressure difference across the nozzle convergent part decreases and therefore the nozzle mass flow rate is reduced. The overall nozzle outflow mass flow averaged axial velocity can be increased by 30.1%, nozzle isentropic efficiency increases from 37.7% to 63.8% and nozzle mass flow rate drops from 16.0 g s−1 to 12.6 g s−1 when inlet vortex is introduced.
- Subjects :
- Pressure drop
Materials science
Vapor pressure
020209 energy
Mechanical Engineering
Mass flow
Nozzle
02 engineering and technology
Building and Construction
Mechanics
Flashing
01 natural sciences
010305 fluids & plasmas
Vortex
0103 physical sciences
0202 electrical engineering, electronic engineering, information engineering
Mass flow rate
Two-phase flow
Subjects
Details
- ISSN :
- 01407007
- Volume :
- 112
- Database :
- OpenAIRE
- Journal :
- International Journal of Refrigeration
- Accession number :
- edsair.doi...........5228a65def08bf1ece5cb025ca2355e7