Fast formation kinetics of methane hydrate promoted by fluorinated graphite

Achieving rapid and high gas storage is the primary goal of solidified natural gas storage (SNG) using hydrate. In this study, the formation and decomposition process of hydrate were visualized on the fluorinated graphite (FG) layer for the first time by sapphire visible vessel. The results show that, the addition of FG alone can promote the formation of hydrate. After adding fluorinated graphite into SDS system, the gas storage capacity can be further increased to 165.2 cm3 STP/g H2O, and the average gas storage rate can be further increased to 20.84 cm3·g−1·min−1, which were 154.7% and 507.7% of SDS system, respectively. Meanwhile, the decomposition speed was faster than SDS system. After optimizing the experimental conditions, it was found that FG-1 with superhydrophobicity could stably exist in the gas-liquid interface and cover it when the dosage reached 1wt% (13.95mg·cm−2), and the combination with 300ppm SDS could greatly promote the growth of hydrate. In addition, the excellent stability of FG made the performance of FG + SDS system remain at about 90% after 10 cycles. The unique growth phenomenon of hydrate in fluorinated graphite system was interesting. By building a hydrate formation platform, FG made water pumped from below to the gas phase and hydrate grow upward continuously. In comparison with other reported carbon nanoparticles, FG system maintained similar gas storage and had excellent gas storage speed, which was 1.35∼40.67 times faster under similar conditions. Therefore, the reusable FG+SDS system with high gas storage capacity and fast growth rate without induction time and mechanical agitation was a promising alternative to hydrate-based SNG technology.