Back to Search
Start Over
Experiments on filtering nano-aerosols from vehicular and atmospheric pollutants under dominant diffusion using nanofiber filter
- Source :
- Separation and Purification Technology. 213:186-198
- Publication Year :
- 2019
- Publisher :
- Elsevier BV, 2019.
-
Abstract
- Nano-aerosols of size 100 nm and below are manifested everywhere in various urban micro-environments. In outdoor, the vehicular emission during traffic jam can release nano-aerosols with concentration above 200 million/m3 (200/cm3). Superimposed on vehicular emission are smog particles, around 10–50 nm, generated from the photochemical reaction of hydrocarbon and NOx in the presence of sunlight. These nano-aerosols, by virtue of their small sizes, can be inhaled readily into our bodies leading possibly to various chronic diseases. Air-borne viruses from influenza to epidemic viruses, which can lead to acute sickness and even death, are also in the same size range of 100 nm. Despite microfibers are being commonly used today in filters, there has been limited studies on filtration of real aerosols using microfiber filters, let alone nanofibrous filters, as most studies used simulated aerosols (e.g. sodium chloride) or test dust. Also, in standard sodium chloride test, only monodispersed aerosol size is allowed to challenge the filter. On the other hand, in reality aerosols of all sizes challenge simultaneously the filter. In this study, for the first time we have used nanofiber filter in a portable test filter set-up to filter polydispersed aerosols from the micro-environment near busy traffic area where aerosols comprise of both vehicular and atmospheric pollutants with size range between 10 and 400 nm. Real-time measurements are carried out with the portable test filter. The test results are compared to the theoretical correlation from Payet with diffusion correction at small Peclet number (Pe). We have found good comparison between test results with theoretical correlations using equivalent aerodynamic diameter for the aerosols with face velocity from 1 to 11 cm/s. A new dimensionless parameter, specific filter resistance (also established independently by Buckingham-π approach), is defined for the first time. It measures the flow drag on fibers to the amount of fibers present in the filter, the lower is the specific filter resistance the better is the filter. For our test condition, it is approximately 1.0–1.2. We have also improved the filtration efficiency of the filter by increasing the fiber basis weight by stacking up two layers of nanofibers. We have demonstrated that the efficiency increases while both the quality factor and specific filter resistance remain constant. We have also investigated the single fiber efficiency due to diffusion and found that at low velocity and low Peclet number (Pe 0.07 m/s) and large Peclet number (>10), there is small deviation from the theory, which is probably due to the smaller aerosols collecting by the larger aerosols upstream of the filter with an airstream consisting of polydispersed aerosol distribution challenging the filter. This has not been realized previously as tests conducted were mostly using monodispersed aerosol size distribution for which aerosol-aerosol interaction was absent.
- Subjects :
- Materials science
business.product_category
Filtration and Separation
02 engineering and technology
Filter (signal processing)
Péclet number
021001 nanoscience & nanotechnology
Analytical Chemistry
Aerosol
law.invention
symbols.namesake
020401 chemical engineering
law
Microfiber
symbols
Fiber
0204 chemical engineering
Composite material
Diffusion (business)
0210 nano-technology
business
Filtration
Dimensionless quantity
Subjects
Details
- ISSN :
- 13835866
- Volume :
- 213
- Database :
- OpenAIRE
- Journal :
- Separation and Purification Technology
- Accession number :
- edsair.doi...........40d71f09b4764913c1dab0da3f81b21b
- Full Text :
- https://doi.org/10.1016/j.seppur.2018.12.021