Practical applications of a nonlinear approach to analysis of earthquake-induced liquefaction and deformation of earth structures

Seismic stability, liquefaction, and deformation of earth structures are critical issues in geotechnical earthquake engineering practice. At present, the equivalent linear approach is considered the ‘state of practice’ in common use. More recently, dynamic analyses incorporating nonlinear, effective-stress-based soil models have been used more frequently in engineering applications. This paper describes a bounding surface hypoplasticity model for sand [Wang ZL. Bounding surface hypoplasticity model for granular soils and its applications. PhD Dissertation for the University of California at Davis, U.M.I. Dissertation Information Service, Order No. 9110679; 1990; Wang ZL, Dafalias YF, Shen CK. Bounding surface hypoplasticity model for sand. ASCE, J Eng Mech 1990;116(5):983–1001; Wang ZL, Makdisi FI. Implementing a bounding surface hypoplasticity model for sand into the FLAC program. In: Proceedings of the international symposium on numerical modeling in geomechanics. Minnesota, USA; 1999. p. 483–90] incorporated into a two-dimensional finite difference analysis program [Itasca Consulting Group, Inc. FLAC (Fast Lagrangian Analysis of Continua), Version 4. Minneapolis, MN; 2000] to perform nonlinear, effective-stress analyses of soil structures. The soil properties needed to support such analyses are generally similar to those currently used for equivalent linear and approximate effective-stress analyses. The advantages of using a nonlinear approach are illustrated by comparison with results from the equivalent linear approach for a rockfill dam. The earthquake performance of a waterfront slope and an earth dam were evaluated to demonstrate the model's ability to simulate pore-pressure generation and liquefaction in cohesionless soils.