Influence of Thin Fluorine Resin Film on DUV LED Packaging Devices

Amorphous fluorine resin is a promising material that can be used for the encapsulation of deep-ultraviolet light-emitting diodes (DUV LEDs) to promote the light output, due to its light characteristics which mean it shows no absorption in the DUV wavelength region. However, obvious decay and high cost are the problems faced by fluorine resin. In this study, thin-fluorine-resin-film-packaged DUV LEDs were fabricated by the drip-coating method and the characteristics were tested. The results show that the light output power increased from 4.95 mW to 5.44 mW at 40 mA, and the cost of fluorine resin can be reduced to ~10%. In addition, no degradation during the aging was observed. However, when the light output power reached 12 mW or higher, >10% decay was observed after aging for 1000 h. In conclusion, thin-fluorine-resin-film-packaged DUV LEDs can achieve 10% light output power enhancement by using less fluorine resin material, and the material is more applicable to low-power DUV LEDs.