Back to Search Start Over

Korrosive Erscheinungsformen an einigen-vorwiegend aus Aluminium bestehenden - technischen Fertigprodukten in einer mikroskopischen Analyse

Authors :
F. Jörg
Source :
Materials and Corrosion/Werkstoffe und Korrosion. 22:682-686
Publication Year :
1971
Publisher :
Wiley, 1971.

Abstract

Bericht uber die Auswertung einiger Schadensfalle aus der Praxis. In einem Falle handelte es sich um Aluminiumverkleidungen aus Innenraumen, wo durch die Klimaanlage salzhaltige Luft mit hohem Feuchtigkeitgehalt zugefuhrt wurde; die dabei auftretende Kondensation fuhrte zur Bildung von Aluminiumchloridbelagen. Eine Abhilfe ware durch beidseitges Lackieren der Verkleidungen moglich gewesen. In einem anderen Falle waren in Fluorchlorkohlenwasserstoffe eingebettete Al-Drahte mit Cu- und Au-Uberzug angegriffen. Ursache war hier ein geringer Feuchtigkeitsgehalt der Halogenwasserstoffen , wodurch es zur Abspaltung von Halogenwasserstoffen gekommen war. Die Zerstorung von Fassadenverkleidungen aus emailliertem Aluminium war durch Emailschaden bedingt, durch welche die Industrieluft das Aluminium angreifen konnte. Die Schaden waren an der weniger belufteten Seite der Verkleidung starker ausgepragt als an der Ausenseite. Microscopic analysis of corrosion phenomena on some structural elements consisting predominantly of aluminium Reports concerning the evaluation of some case histories. In one case structural aluminum elements from the ceiling of a room were corroded by the salt containing humid air fed by the air conditioning system. The condensation connected with this conditioning resulted in the formation of aluminum chloride. A prevention of this corrosion would have been possible by coating either side of the aluminum elements. In another case aluminum wire with Cu and Au coating had been attacked in fluorochlorinated hydrocarbon. This attack was caused by a very low moisture contents of these hydrocarbon which gave rise to the separation of hydrochloric and hydrofluoric acids. The destruction of aluminum fassades (enamel coated) was due to discontinuities in the coating so that the polluted air could attack the base metal. The destructions were more pronounced at the inner surface (less aerated) that at the surface exposed to the open atmosphere.

Details

ISSN :
15214176 and 09475117
Volume :
22
Database :
OpenAIRE
Journal :
Materials and Corrosion/Werkstoffe und Korrosion
Accession number :
edsair.doi...........0d2e76500a243debf2b1845ddfbf8bf6