Flow-Induced Vibrations of Single and Tandem Square Columns

This work reports a set of numerical experiments to understand flow-induced vibrations of the square columns kept in a tandem arrangement. Results on the coupled force and response dynamics are presented for an isolated column and for a pair of square columns in the tandem configuration where downstream column is elastically mounted and free to oscillate in in-line and transverse directions. We assess the combined wake-induced and sharp-corner based galloping effects on the downstream column by comparing with the isolated square column counterpart. It is known that the circular cylinders undergo vortex-induced motion alone whereas motion of a square column is vortex-induced at low Re and galloping at high Re. The simulations are performed by means of a Petrov-Galerkin based finite-element solver using Arbitrary Lagrangian-Eulerian technique to account for the fluid mesh motion. The predicted results of the isolated column agree well with the available numerical results in the literature. The dimensions of the square columns and the domain are set in order to a have total blockage area of 5 %. The effects of reduced velocity on the fluid forces, wake contours, and the phase angles are analyzed. This work is also an attempt to enhance our understanding on the origin of wake-induced vibrations in a tandem arrangement of bluff bodies. In the case of tandem arrangement, upstream vortex shifts the stagnation point on the downstream column to the lower suction region. Thus a larger lift force is observed for the downstream column as compared to a vibrating isolated column. Phase difference between the transverse load and velocity of the downstream column determines the extent of upstream wake interaction with downstream column. When the column velocity is in-phase with the transverse pressure load component, interaction of wake vortex with the downstream column is minimum. For higher reduced velocities (Ur > 15), the wake downstream is very wide and irregular and the phase angle is consistently close to 180°.Copyright © 2015 by ASME