Application of finite element method for determination of stress intensity factor and plastic zone geometry in an aluminium alloy sheet under uniaxial tension

High strength materials have gained prominence in the fields of aero-structures, space missiles, ship-building, pressure vessels etc. However, high strength materials are often characterised by low values of crack resistance or fracture toughness. Knowledge of stress intensity factor (SIF) is essential to predict their fracture toughness. SIF values can be obtained both theoretically and experimentally. Theoretical methods include analytical techniques as well as the finite element method (FEM). The former is used for simpler geometries and the latter for complicated geometries of engineering structures. The SIF as a function of crack size in an aluminium alloy 2024-T3 (Al-4·5% Cu, 1·5% Mg, 0·6% Mn) sheet was determined by a computer method. These values were obtained directly from the stresses as well as indirectly from strain energy release rateG andJ integral. The results agree well with the normalised values obtained from an ASTM formula. The size and shape of the plastic zone at the crack tip have been determined as a function of nominal stress for a fixed crack length. The plastic zone has the form of two ellipsoids with their maximum spreads oriented around 69° to the crack axis.