Experimental analysis for process control in hybrid lithography

The positive tone resist AZ 1505 is characterized with respect to hybrid lithography that uses thermal nanoimprint lithography to define the nanometric part of a lithography pattern in a first step, followed by optical lithography to define the micron-scaled patterns in the same resist layer in a second step. The parameters investigated are glass temperature and sensitivity (dose curves), both after thermal loading in a typical imprint sequence. The glass transition of the multicomponent resist formulation is derived from stress measurements and the dose curves are evaluated from development rate monitoring via laser interferometry at 532 nm. The results show that both parameters are affected by thermal loading, but adequate choice of the processing parameters makes it possible to compensate for the thermal degradation of the photoresist as long as the imprint temperature chosen does not exceed 130 °C. Based on the characterization results, successful hybrid lithography and lift-off has been demonstrated ...