Development of a 10-J, 10-Hz laser amplifier system with cryo-cooled Yb:YAG ceramics using active-mirror method

A 11.5 J at 40 ns output has been obtained from a diode-pumped cryo-cooled Yb:YAG ceramics active-mirror laser amplifier system. The system consists of two amplifier heads which has four Yb:YAG ceramic disks and two pump LD modules. The Yb:YAG ceramics are cooled by conventional cryostat from rear side and are pumped by LD modules from front-side. A pump pulse is delivered to Yb:YAG ceramics coaxially with a seed pulse to reduce damage risk at a dielectric coating of Yb:YAG ceramics due to simplified coating design. To realize this system design, a LD module has been developed to keep a rectangle pattern with side length of around 37 mm among imaging depth of about 10cm at working distance of about 410 mm. As an experimental result of two pass amplification, a 11.5 J pulse energy was obtained with input energy of 1.0 J and total pump energy of 90.2 J. Then, an optical-to-optical conversion efficiency was 11.6% and an extraction efficiency was estimated to be 42%. In our knowledge, this is the highest output energy with nano second pulse duration in cryo-cooled Yb:YAG active-mirror laser amplification scheme. A repetition rate of 0.05 Hz depends on a limitation of a repetition rate of the seed pulse. A dependence of small-signal-gain on pumping repetition rate of the active-mirror laser head was experimentally evaluated. From the experimental result, we have estimated a feasible repetition rate of over 5 Hz. A 10 Hz operation will be demonstrated to reduce a thermal resistance between Yb:YAG ceramics and cryostat. Finally, this laser amplifier system is installed to a 100-J class laser system as preamplifier.