Back to Search
Start Over
Enhancement of surface mechanical properties by using TiN[BCN/BN]n/c-BN multilayer system
- Source :
- Applied Surface Science. 257:1098-1104
- Publication Year :
- 2010
- Publisher :
- Elsevier BV, 2010.
-
Abstract
- The aim of this work is to improve the mechanical properties of AISI 4140 steel substrates by using a TiN[BCN/BN] n /c-BN multilayer system as a protective coating. TiN[BCN/BN] n /c-BN multilayered coatings via reactive r.f. magnetron sputtering technique were grown, systematically varying the length period ( Λ ) and the number of bilayers ( n ) because one bilayer ( n = 1) represents two different layers ( t BCN + t BN ), thus the total thickness of the coating and all other growth parameters were maintained constant. The coatings were characterized by Fourier transform infrared spectroscopy showing bands associated with h-BN bonds and c-BN stretching vibrations centered at 1400 cm −1 and 1100 cm −1 , respectively. Coating composition and multilayer modulation were studied via secondary ion mass spectroscopy. Atomic force microscopy analysis revealed a reduction in grain size and roughness when the bilayer number ( n ) increased and the bilayer period decreased. Finally, enhancement of mechanical properties was determined via nanoindentation measurements. The best behavior was obtained when the bilayer period ( Λ ) was 80 nm ( n = 25), yielding the relative highest hardness (∼30 GPa) and elastic modulus (230 GPa). The values for the hardness and elastic modulus are 1.5 and 1.7 times greater than the coating with n = 1, respectively. The enhancement effects in multilayered coatings could be attributed to different mechanisms for layer formation with nanometric thickness due to the Hall–Petch effect; because this effect, originally used to explain increased hardness with decreasing grain size in bulk polycrystalline metals, has also been used to explain hardness enhancements in multilayered coatings taking into account the thickness reduction at individual single layers that make up the multilayered system. The Hall–Petch model based on dislocation motion within layered and across layer interfaces has been successfully applied to multilayered coatings to explain this hardness enhancement.
- Subjects :
- Materials science
Bilayer
Analytical chemistry
General Physics and Astronomy
chemistry.chemical_element
Surfaces and Interfaces
General Chemistry
Nanoindentation
Sputter deposition
engineering.material
Condensed Matter Physics
Titanium nitride
Surfaces, Coatings and Films
chemistry.chemical_compound
chemistry
Coating
Boron nitride
engineering
Tin
Elastic modulus
Subjects
Details
- ISSN :
- 01694332
- Volume :
- 257
- Database :
- OpenAIRE
- Journal :
- Applied Surface Science
- Accession number :
- edsair.doi...........05c1e5c27041358c5c1c74db37310c31