Distinctive Impact of Heat Treatment on the Mechanical Behavior of Nacreous and Crossed-Lamellar Structures in Biological Shells: Critical Role of Organic Matrix

As biological ceramic composites, mollusk shells exhibit an excellent strength–toughness combination that should be dependent on aragonite/organic matrix interfaces. The mechanical properties and fracture mechanisms of the nacreous structure in the Cristaria plicata(C. plicata) shell and crossed-lamellar structures in the Cymbiola nobilis(C. nobilis) shell were investigated, focusing on the critical role of the organic matrix/aragonite interface bonding that can be adjusted by heat treatments. It is found that heat treatments have a negative impact on the fracture behavior of the nacreous structure in the C. plicatashell, and both the bending and shear properties decrease with increasing heat-treatment temperature because of the loss of water and organic matrix. In contrast, for the crossed-lamellar structure in C. nobilisshell, the water loss in heat treatment slightly decreases its bending properties. When the organic matrix is melted after an appropriate heat treatment at 300°C for 15 min, its bending properties can be greatly enhanced; in this case, remarkable toughening mechanisms involving crack deflection and the fiber pull-out are exhibited, although the interfacial bonding strength reduces. Therefore, an appropriate heat treatment would bring about a positive impact on the fracture behavior of crossed-lamellar structure in the C. nobilisshell. The major research findings have provided an important inspiration that the inducement of moderately weak interfaces rather than all strong interfaces might enhance the comprehensive mechanical properties of fiber-reinforced ceramic composites.