Experimental investigations and statistical modeling of cutting force and torque in rotary ultrasonic bone drilling of human cadaver bone

Cutting force and torque are important factors in the success of the bone drilling process. In the recent past, many attempts have been made to reduce the cutting force and torque in the bone drilling process. In this work, drilling on human cadaver bones has been performed using rotary ultrasonic bone drilling process to investigate the effect of drilling parameters on cutting force and torque. The experimental work was carried on a recently developed rotary ultrasonic bone drilling machine for surgical operations. The experimental work was performed in two phases. The first phase includes a comparative study between rotary ultrasonic bone drilling and conventional surgical bone drilling, to study the influence of various drilling parameters (rotational speed, drill diameter, and drilling tool feed rate) on the cutting force and torque. The results revealed that the cutting force and torque produced during drilling operations in rotary ultrasonic bone drilling were lesser (30%–40%) than conventional surgical bone drilling. In the second phase, response surface methodology was used to perform the statistical modeling of cutting force and torque in rotary ultrasonic bone drilling process. Analysis of variance was performed at a confidence interval of 95% to analyze the significant contribution (p< 0.05) of process parameters (drilling speed, feed rate, drill diameter, and abrasive particle size) on the responses (cutting force and torque). The confirmatory experiments were performed to validate the developed statistical models. It was found that both cutting force and torque decrease with increase in drilling speed and increases with the increasing drill diameter, feed rate, and abrasive particle size.