Plasticization-Resistant Carboxyl-Functionalized 6FDA-Polyimide of Intrinsic Microporosity (PIM–PI) for Membrane-Based Gas Separation

A novel trimethyl-substituted carboxyl-containing polyimide was synthesized via a one-pot high-temperature polycondensation reaction of 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) and 3,5-diamino-2,4,6-trimethylbenzoic acid (TrMCA). The polyimide (6FDA-TrMCA) displayed a Brunauer–Emmett–Teller surface area of 260 m2g–1, demonstrating intrinsic microporosity, in contrast to the related low-free volume COOH-functionalized polyimide 6FDA-DABA. Compared to the nonfunctionalized 6FDA polyimide analogue made from 2,4,6-trimethyl-m-phenylenediamine (TrMPD)—also known as 6FDA-DAM—carboxyl functionalization in 6FDA-TrMCA resulted in reduced surface area, lower fractional free volume, and tighter average chain spacing. Gas permeabilities of 6FDA-TrMCA were typical of functionalized polyimides of intrinsic microporosity (PIM–PIs). For example, at 2 atm and 35 °C, 6FDA-TrMCA showed pure-gas H2and CO2permeability of 193 and 144 barrer, coupled with H2/CH4and CO2/CH4selectivity of 61 and 45, respectively. Notably, in mixed-gas permeation tests with an equimolar CO2–CH4mixture at a CO2partial pressure of 12 atm, 6FDA-TrMCA demonstrated performance located on the 2018 mixed-gas upper bound with a CO2permeability of ∼98 barrer and CO2/CH4permselectivity of 38. As the first reported COOH-functionalized PIM–PI homopolymer, 6FDA-TrMCA revealed excellent resistance against CO2-induced plasticization at least up to a CO2partial pressure of 15 atm, covering the range of typical wellhead CO2partial pressures (5–10 atm).