A Low-cost Surface Modified Battery-used Polyethylene Membranes for Reverse Osmosis Applications.

Reverse osmosis (RO) membranes have been widely used in the field of membrane separation. However, most of the commercial RO membranes are fabricated based on a polysulphones- or polyethersulfone-modified polyethylene glycol terephthalate (PET) support, which are thick and exhibit poor solvent resistance. In this study, polyethylene (PE) battery membranes without any hydrophilic modification were directly used to prepare PE-RO membranes. The structures of the products were confirmed via attenuated total reflection Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. The resulting RO membrane prepared with 0.05 wt.% of trimesoyl chloride and 2 wt.% of m-phenylenediamine exhibited a water flux of 12.61 L m⁻² h⁻¹ with a desalination (NaCl) rate of 98.6%. The thickness of the PE-RO membrane is 80% of the thickness of the traditional RO membranes and hence has a wider application as a separation membrane. [ABSTRACT FROM AUTHOR]