Potential of prediction in manufacturing process and inspection sequences for scrap reduction.

With increasing quality requirements, especially for safety-critical products such as in medical technology, manufacturing companies face the challenge, that the quality inspection of component characteristics may become a crucial factor for economic production. For increasing the ratio of correctly identified scrap without increasing the amount of physical inspection, prediction models pose a valuable tool. Prediction models in manufacturing build process models through process data collected during the manufacturing process. The prediction models can for example be used to predict the product quality from the process data, which enables the substitution of physical quality inspections through virtual inspections. Before selecting suitable prediction models, checkpoints in the manufacturing process and inspection sequence (MPIS) for integrating the prediction models profitably have to be identified. Therefore, the paper aims to provide a methodology to generate integrated quality strategies for MPIS that combine physical inspection with the prediction of quality characteristics. Furthermore, a methodology for the economic evaluation of the quality strategies as decision support is provided. Since the number of prediction models available for predicting quality based on process data is manifold, the explicit recommendation for the implementation of a certain prediction model is not the focus of this paper. The methodology presented rather focuses on the identification of suitable checkpoints in the MPIS for prediction model integration. For generating quality strategies suitable checkpoints in the manufacturing process sequence have to be identified. Therefore, three aspects are considered, the influence of the manufacturing process on the change in a characteristic and the overall importance of a characteristic for the component function as well as the ability of the characteristic and process for being predicted. A prediction recommendation is calculated that enables the derivation of quality strategies as a combination of physical and virtual inspection for different characteristics in different checkpoints. For the economic evaluation of the derived quality strategies two cases for supplementing physical inspection with prediction models to either compensate for the alpha- or beta-error rate are presented. The most reasonable quality strategy is chosen according to its economic potential. For validation, the applicability of the methodology for integrating prediction models in manufacturing process and inspection sequences to a use case of medical technology is demonstrated successfully. It is shown that the methodology supports users in identifying possible quality strategies and their economic evaluation for manufacturing process and inspection sequences as a basis for the decision regarding quality strategies to be implemented. [ABSTRACT FROM AUTHOR]