Development of constitutive model for laminated veneer lumber using digital image correlation technique.

This paper describes the development of a three-dimensional constitutive model for laminated veneer lumber (LVL) needed for new developments using this material. The LVL was manufactured in New Zealand from Radiata Pine. Experimental testing has been performed according to European timber testing standards. Block compression testing has resulted in modulus of elasticity values in the three material directions. Digital image correlation (DIC) technique has been used to determine the six Poisson's ratios. Shear testing, whereby timber specimens were glued between two steel plates, has given stiffness values using DIC measurements. Experimental testing results have been compared with values found in literature. Results from this experimental testing programme have made it possible to create a three-dimensional elastic material model of LVL for the use in finite element analysis programmes. Although the material properties do not result in a symmetrical constitutive matrix, only minor adjustments are needed to gain the benefits of a symmetrical matrix. [ABSTRACT FROM AUTHOR]