Research Article.

AbstractThe aim of the present study was to determine the effect of a variety of abnormal fibres on the mechanical properties of paper made from Norway spruce, Picea abies(L.) Karst. Fibres representing abnormality were obtained from trees treated by irrigation and fertilisation. Moreover, fibres from compression wood and its accompanying opposite wood were isolated. The effect of dislocations on paper quality was studied on four mixtures (20, 40, 60 and 80% fibres with induced dislocations) of untreated/compressed fibres. Two more groups consisting of control untreated samples and samples with 100%-induced dislocations were also included in the test. The mechanical properties of the paper were tested and the results were compared to those of control samples. Abnormal fibres reduced the desired mechanical properties of the final paper concerning tensile strength, modulus of elasticity and tear-tensile index. Irrespective of the type of treatment, all morphological changes introduced in fibre cell walls appear to directly affect changes in the mechanical properties of the paper. Control samples had a tear index of 25 compared to 10 mN m2g-1of samples containing 100% dislocations. It is obvious that 20% of dislocations, an amount that is expected to be induced in pulp under mechanical processing and transport, will contribute to a decrease in tear index with an average of 3 mN m2g-1, i.e., 10% of the total value. [ABSTRACT FROM AUTHOR]