Grain size effect on the dielectric behavior of nanostructured Ni0.5Zn0.5Fe2O4.

The dielectric properties of nanocrystalline Ni_0.5Zn_0.5Fe₂O₄ spinel ferrite with various grain sizes, obtained by mechanically milling, have been studied using impedance measurements in the frequency range from 1 Hz to 10 MHz and in the temperature range from 300 to 823 K. The effect of milling, frequency, and temperature on the dielectric properties of nanocrystalline Ni-Zn ferrite is discussed. The real part of dielectric constant ([variant_greek_epsilon]^′) for the 14 nm grain size sample is found to be about an order of magnitude smaller than that of the bulk nickel zinc ferrite. The anomalous frequency dependence of [variant_greek_epsilon]^′ has been explained on the basis of hopping of both electrons and holes. The unusual increase in dielectric loss with milling is because of the increase in electrical conductivity due to oxygen vacancies introduced upon milling. The electrical modulus has been fitted to a stretched exponential function and the results clearly reveal the presence of the non-Debye type of dielectric relaxation in this material. The relaxation frequency is observed to decrease with milling due to increasing interaction between charge carriers arising out of oxygen vacancies introduced by milling. The mechanism for the electrical conduction is found to be the same as that for the dielectric polarization. [ABSTRACT FROM AUTHOR]