An Assessment of Coating Thickness on the Microstructure and Mechanical Behavior of IN625 Coating on Ni-Based Superalloy Substrate Deposited by High Velocity Air Fuel Technique.

High velocity air fuel (HVAF) technique, an innovative thermal spraying method, has proven more promising than traditional methods for both coating and repairing surfaces. This study focuses on the application of different thicknesses of IN625 superalloy coatings using HVAF to assess its potential for repair and cladding applications. Detailed coating characteristics of IN625 superalloy coating have been examined based on various techniques like nanoindentation, adhesion, micro-tensile and flexural strength of the coated samples. Within the coating, γ (NiCr rich), secondary peaks γ″ and carbide phases were identified. Particle deformation under impact and rapid cooling resulting in the formation of γ″ precipitates enhances the coating strength. However, the decrease in the adhesion strength with increasing coating thicknesses results from the defects formed at the coating–substrate interface and also influenced by thermal stresses and oxidation. Coating microstructure revealed a strong particle-to-substrate adhesion and varied splat morphologies dependent on degree of particle melting—at higher particle velocities in-flight oxidation of the powders was also minimal. Furthermore, the in-plane cohesive strength of the coating approaches 50% of the wrought alloy's yield strength, attributed to strain hardening from the peening effect. However, decrease in flexural strength as coating thickness increases due to compressive residual stress and coating delamination. The flexural strength of the as-sprayed coating exhibits up to 70% of the flexural strength of the wrought material with thicker coatings exhibiting lower strength. [ABSTRACT FROM AUTHOR]