A High-Level Synthesis Approach for a RISC-V RV32I-Based System on Chip and Its FPGA Implementation †.

In this paper, we present a RISC-V RV32I-based system-on-chip (SoC) design approach using the Vivado high-level synthesis (HLS) tool. The proposed approach consists of three separate levels: The first one is an HLS design and simulation purely in C++. The second one is a Verilog simulation of the HLS-generated Verilog implementation of the CPU core, a RAM unit initialized with a short assembly code, and a simple output port which simply forwards the output data to the simulation console. Finally, the third level is the implementation and testing of this SoC on a low-cost FPGA board (Basys3) running at a clock speed of 100 MHz. A sample C code was compiled using the GNU RISC-V compiler tool chain and tested on the HLS-generated RISC-V RV32I core as well. The HLS design consists of a single C++ file with fewer than 300 lines, a single header file, and a testbench in C++. Our design objectives are that (1) the C++ code should be easy to read for an average engineer, and (2) the coding style should dictate minimal area, i.e., minimal resource utilization, without significantly degrading the code readability. The proposed system was implemented for two different I/O bus alternatives: (1) a traditional single clock cycle delay memory interface and (2) the industry-standard AXI bus. We present timing closure, resource utilization, and power consumption estimates. Furthermore, by using the open-source synthesis tool yosys, we generated a CMOS gate-level design and provide gate count details. All design, simulation, and constraint files are publicly available in a GitHub repo. We also present a simple dual-core SoC design, but detailed multi-core designs and other advanced futures are planned for future research. [ABSTRACT FROM AUTHOR]