Advanced Numerical Simulation of Scour around Bridge Piers: Effects of Pier Geometry and Debris on Scour Depth.

Investigating different pier shapes and debris Finteractions in scour patterns is vital for understanding the risks to bridge stability. This study investigates the impact of different shapes of pier and debris interactions on scour patterns using numerical simulations with flow-3D and controlled laboratory experiments. The model setup is rigorously calibrated against a physical flume experiment, incorporating a steady-state flow as the initial condition for sediment transport simulations. The Fractional Area/Volume Obstacle Representation (FAVOR) technique and the renormalized group (RNG) turbulence model enhance the simulation's precision. The numerical results indicate that pier geometry is a critical factor influencing the scour depth. Among the tested shapes, square piers exhibit the most severe scour, with depths reaching 5.8 cm, while lenticular piers show the least scour, with a maximum depth of 2.5 cm. The study also highlights the role of horseshoe, wake, and shear layer vortices in determining scour locations, with varying impacts across different pier shapes. The Q-criterion study identified debris-induced vortex generation and intensification. The debris amount, thickness, and pier diameter (T/Y) significantly affect the scouring patterns. When dealing with high wedge (HW) debris, square piers have the largest scour depth at T/Y = 0.25, while lenticular piers exhibit a lower scour. When debris is present, the scour depth rises at T/Y = 0.5. Depending on the form of the debris, a significant fluctuation of up to 5 cm was reported. There are difficulties in precisely estimating the scour depth under complicated circumstances because of the disparity between numerical simulations and actual data, which varies from 6% for square piers with a debris relative thickness T/Y = 0.25 to 32% for cylindrical piers with T/Y = 0.5. The study demonstrates that while flow-3D simulations align reasonably well with the experimental data under a low debris impact, discrepancies increase with more complex debris interactions and higher submersion depths, particularly for cylindrical piers. The novelty of this work lies in its comprehensive approach to evaluating the effects of different pier shapes and debris interactions on scour patterns, offering new insights into the effectiveness of flow-3D simulations in predicting the scour patterns under varying conditions. [ABSTRACT FROM AUTHOR]