Influence of Loading Direction on Compressive Strength of Concrete Block Masonry.

This paper presents the results of experimental testing of block masonry prisms and wallettes under uniaxial compression. The compressive load was applied in a direction perpendicular or parallel to the bed joints. Masonry prisms and wallettes were tested in the former direction, whereas only wallettes were tested in the latter direction. No influence of mortar strength or block thickness was observed on the cracking and failure patterns of specimens of similar type, although material crushing and spalling was marginally influenced by block strength. The cracking load for the assemblages tested normal to the bed joint was nearly 90% of the peak load capacity and higher as compared to 70% of the peak load capacity for the wallettes tested parallel to the bed joints. Similar load capacity and elastic modulus were observed for the prisms and wallettes tested normal to the bed joints. Whereas the strength for the wallettes tested parallel to the bed joints was 49%–83% less compared to those tested normal to the bed joints, their elastic modulus was nearly 25% higher. The experimental strength and strain values were compared with the existing analytical methods, which correlated well. [ABSTRACT FROM AUTHOR]