Improving GNSS-IR Sea Surface Height Accuracy Based on a New Ionospheric Stratified Elevation Angle Correction Model.

Approximately 71% of the Earth's surface is covered by vast oceans. With the exacerbation of global climate change, high-precision monitoring of sea surface height variations is of vital importance for constructing global ocean gravity fields and preventing natural disasters in the marine system. Global Navigation Satellite System Interferometry Reflectometry (GNSS-IR) sea surface altimetry is a method of inferring sea surface height based on the signal-to-noise ratio of satellite signals. It enables the retrieval of sea surface height variations with high precision. However, navigation satellite signals are influenced by the ionosphere during propagation, leading to deviations in the measured values of satellite elevation angles from their true values, which significantly affects the accuracy of GNSS-IR sea surface altimetry. Based on this, the contents of this paper are as follows: Firstly, a new ionospheric stratified elevation angle correction model (ISEACM) was developed by integrating the International Reference Ionosphere Model (IRI) and ray tracing methods. This model aims to improve the accuracy of GNSS-IR sea surface altimetry by correcting the ionospheric refraction effects on satellite elevation angles. Secondly, four GNSS stations (TAR0, PTLD, GOM1, and TPW2) were selected globally, and the corrected sea surface height values obtained using ISEACM were compared with observed values from tide gauge stations. The calculated average Root Mean Square Error (RMSE) and Pearson Correlation Coefficient (PCC) were 0.20 m and 0.83, respectively, indicating the effectiveness of ISEACM in sea surface height retrieval. Thirdly, a comparative analysis was conducted between sea surface height retrieval before and after correction using ISEACM. The optimal RMSE and PCC values with tide gauge station observations were 0.15 m and 0.90, respectively, representing a 20.00% improvement in RMSE and a 4.00% improvement in correlation coefficient compared to traditional GNSS-IR retrieval heights. These experimental results demonstrate that correction with ISEACM can effectively enhance the precision of GNSS-IR sea surface altimetry, which is crucial for accurate sea surface height measurements. [ABSTRACT FROM AUTHOR]