Anomaly Detection for Charging Voltage Profiles in Battery Cells in an Energy Storage Station Based on Robust Principal Component Analysis.

Lithium-ion batteries, with their high energy density, long cycle life, and non-polluting advantages, are widely used in energy storage stations. Connecting lithium batteries in series to form a battery pack can achieve the required capacity and voltage. However, as the batteries are used for extended periods, some individual cells in the battery pack may experience abnormal failures, affecting the performance and safety of the battery pack. At the same time, as batteries operate in complex environments, the data collected by sensors are susceptible to random noise and drift interference, which can affect the accuracy of anomaly detection in individual battery cells. In order to solve this problem, this article proposes an anomaly detection method for battery cells based on Robust Principal Component Analysis (RPCA), taking the historical operation and maintenance data of a large-scale battery pack from an energy storage station as the research subject. Firstly, theRPCA is used to denoise the observed voltage data of the battery cells to an extreme degree, obtaining a baseline charging state curve for a cell consistency assessment. This also solves the problem of sensor outputs being affected by random noise. To further detect and identify abnormal battery cells, the RPCA is used to extract outlier components. Based on the Average Deviation-3σ principle and by utilizing Gaussian distribution probability characteristics, battery cells are conducted to screen, and the serial numbers of the anomaly cells are obtained. Finally, the effectiveness and accuracy of this anomaly detection method for battery cells are compared and verified through different statistical distributions. [ABSTRACT FROM AUTHOR]