Effect of nucleating agent incorporation on the crystallization and mechanical properties of polylactide/polyamide elastomer blends.

The widespread application of polylactide (PLA) has been limited by its slow crystallization rate and poor toughness. In the present work, a low molecular weight nucleator, TMC 301, and polyamide elastomer (PAE) were incorporated into PLA through melt blending to mediate both the crystallization capability and impact toughness. It was found that the introduction of TMC 301 decreased the crystallization temperature of PLA during the cooling process, while enhancing its cold crystallization capacity of PLA in the heating scan. Accordingly, the presence of TMC 301 shortened the half-crystallization time of PLA at 95°C in the ternary blends with minimal influence on the Avrami index. Moreover, the dispersion size of PAE decreased when the concentration of TMC 301 increased to 0.3 wt%, leading to a substantial increase in the tensile toughness and the impact strength of the PLA/PAE/TMC 301 blend. It is suggested that the size of the elastomer particles is a critical factor influencing the toughening efficiency of TMC301 in PLA/PAE blends. The nucleator TMC 301 and polyamide elastomer (PAE) were incorporated into PLA through melt blending to enhance both crystallization capability and toughness. The phase structure, crystallization behavior and the mechanical performances were studied. [ABSTRACT FROM AUTHOR]