Properties of biocoal briquettes from mesoporous coals and rice husk and their effects on environmental pollution.

This work assessed some properties and effects of biocoal briquettes on environmental pollution compared with utilising coal alone. A mixture of coal fines and rice husks was prepared, with cassava starch gel as a binder, before compaction in a briquetting machine and drying with a solar dryer. Samples of the coal fines, rice husk, cassava flour and briquettes were analysed for their elemental and oxide concentrations via an energy-dispersive X-ray fluorescence analyser. The heat fuels were analysed for their thermal behaviour via thermogravimetric analyser (TGA), whereas the specific surface area, pore size and pore volume were determined using a Brunner–Emmett–Teller (BET) analyser. The conversion of the tested coals to biocoal briquettes resulted in a reduction in the level of arsenic in the briquettes. Additionally, the sulphur level decreased from 1.96 to 1.11% in the Okobo-Enjema briquettes and from 1.78 to 0.90% in the Onyeama briquettes. However, the levels of manganese increased from 0.04 to 0.22% in the Okobo-Enjema briquettes and from 0.04 to 0.21% in the Onyeama briquettes. Thermogravimetric analysis at different heating rates revealed that derivative weight loss increased with increasing heating rate, from 4.4% at 10 °C/min to 5.5% at 20 °C/min. BET analysis revealed that the briquettes had larger pore diameters, volumes and specific surface areas than did the coal samples. The coal samples have greater propensity to pollute the environment as the amount of potentially hazardous elements in the samples is greater than in their biocoal briquettes. [ABSTRACT FROM AUTHOR]