Effect of Coffee Thermocycling on Color Stability and Translucency of CAD‐CAM Polychromatic High Translucent Zirconia Compared With Lithium Disilicate Glass Ceramic.

Aims and Objectives: To evaluate the effect of coffee thermocycling on color stability and translucency of CAD‐CAM polychromatic high translucent zirconia compared with lithium disilicate glass ceramic. Methods: Sixteen rectangular plates (14 × 16 × 1.0 mm) of two ceramic materials (IPS E.max CAD (IEC), IPS E.max ZirCAD Prime [IZP]) were prepared. Each specimen was measured for color coordinates using a spectrophotometer following 30,000 cycles of coffee thermocycling. CIELAB formula was used to determine color and translucency differences (ΔE and ΔTP). The means of ΔE and ΔTP were compared using independent samples t‐test and were evaluated using their respective 50%:50% perceptibility and acceptability thresholds (PT and AT). One‐way analysis of variance was performed to evaluate the translucency parameter (TP) and surface roughness (Ra) of each material. Results: Mean ΔE values of IEC (4.69) and IZP (4.64) were higher than the AT (ΔE ≤ 2.7) with no significant difference found between the two groups (p = 0.202). Considering the TP, only IEC showed a statistically significant increase in TP value (p < 0.001). However, the mean ΔTP of IEC (3.25) remained within the range of acceptability (1.3 < ΔTP ≤ 4.4). Conclusions: Within the limitations of this current study, the color stability of all materials was clinically affected by coffee thermocycling. In terms of translucency, only lithium disilicate glass ceramic was influenced by coffee thermocycling. High translucent zirconia had superior translucency stability compared to lithium disilicate glass ceramic. [ABSTRACT FROM AUTHOR]