Forming of bamboo fibers and fabrication of a bamboo fiber composite with a complicated shape.

The objective of this research was to examine the bamboo fiber preforming procedures and the effects of preforming on the mechanical properties. The bamboo fibers were bent to an angular shape by using mold compression. Different moisture contents were applied to the bamboo fibers before bending. Next, tensile tests were conducted on the preformed bent fibers to investigate the strength degradation caused by fiber damage during the forming process. Additionally, the vacuum preforming method, limited to a pressure of 1 atm, was used for bamboo fiber bending preforming. Different fillet radii of the angled shapes were used in the experiments to investigate the impact of the angle curvature at the bending points on the strength of the bent bamboo fibers. Unidirectional bamboo fiber mats were manually woven using polyester fiber lines and preformed with a closed mold. The fabrication of the unidirectional bamboo fiber/epoxy resin composites was conducted by vacuum-assisted resin transfer molding (VARTM). In this study, valuable insights into the design of the bamboo fiber preforming and composite manufacturing processes are provided, and our results can be used to contribute to the progress and utilization of the bamboo fibers in composite materials. [ABSTRACT FROM AUTHOR]