Weld-joint design to optimize groove weld depth and mechanical properties for welding of nozzle onto pressure vessel.

Full and partial set-in weld-joints connect the nozzle to pressure vessels to prevent lamellar tearing. This investigation aims to compare full and partial set-in weld-joints through computer simulations, numerical modelling, welding experiments, nondestructive examination and destructive testing. The nozzle-to-shell opening connection's weld-joint design model is DN20, with a 50 mm shell wall thickness. The optimal groove weld depth, at a safety factor of 3.5, ranges from 20 to 50 mm. We investigated weld-joint design variations using design-of-experiment, which included actual welding and mechanical testing. The inter-run temperature and its interaction with the heat input were found to be statistically significant. The mechanical properties of welded joint are better than those of the specified material, A516 Grade 70, which include an average impact toughness of 89.5 J at -50 °C, a microhardness of 195 Hv10, an ultimate tensile strength of 533 MPa, a yield strength of 391.5 MPa and an elongation of 56.5%. The coefficients of determination of impact toughness and microhardness, which have R² values of 88.73% and 76.65%, respectively, conclude a successful welding experiment. The design and mechanical testing results conclude the reliability of the weld-joints. [ABSTRACT FROM AUTHOR]