Effects of Precursors Ratio and Curing Treatment on the Icephobicity of Polydimethylsiloxane.

Elastomers are intriguing materials for many applications, one of these being icephobic coatings. Elastic modulus and work of adhesion are the key parameters coming into play in ice detachment mechanisms, and can be related to hardness and wettability. Polydimethylsiloxane (PDMS) is widely used for anti-ice applications; however, not many works deal with the correlation between cross-linking grade, curing treatments, and icephobicity. This study focuses on PDMS (Sylgard184^®) coatings, encompassing four different pre-polymer to cross-linking agent (A:B) ratios ranging from 5:1 to 30:1, and nine curing treatments. The results indicate that increasing the A:B ratio enhances hydrophobicity, softness, and icephobicity, assessed through shear stress measurements. Curing treatments primarily affect hardness and icephobicity, with longer heat treatments resulting in higher hardness and ice adhesion. All samples exhibit promising performances in lowering shear stress values, up to seven times in respect to the uncoated reference for 30:1 ratio. Additionally, a durability assessment is conducted on samples exposed to stress tests in the climatic chamber. A slight deterioration in hydrophobicity across all samples is observed and, notably, a significant hardness increase, around 13%, is experienced for the 5:1 ratio only. The samples also demonstrate an overall robust icephobicity after stress tests, and, for the 30:1 ratio, an average shear stress value four times lower than the reference is maintained. In this work, we highlight the importance of the fine-tuning of the precursors ratio and thermal treatments on the PDMS properties and durability. [ABSTRACT FROM AUTHOR]