A Study on an Energy-Regenerative Braking Model Using Supercapacitors and DC Motors.

This study presents an energy regeneration model and some theory required to construct a regeneration braking system. Due to the effects of carbon dioxide (CO₂) emissions, there is increasing interest in the use of electric vehicles (EVs), electric bikes, electric bicycles, electric buses and electric aircraft globally. In order to promote the use of electric transportation systems, there is a need to underscore the impact of net zero emissions. The development of EVs requires regenerating braking system. This study presents the advantages of regenerative braking. This system is globally seen in applications such as electric cars, trams, and trains. In this study, the design specification, design methodology, testing configurations, Simulink model, and recommendations will be outlined. A unique element of this work is the practical experiment that was carried out using 1.5 Amps with no load and 2.15 Amps with a load. The discharge voltage was purely from the 22 W bulb load connected to the capacitor bank as we limited this study to the use of 1.5 Amps and it took 15 min for a full discharge cycle, after which no charge was left in the capacitor bank. The results showed that the discharge rate and charging rate for the regenerative braking system were effective but could be improved. The objective of this paper is to investigate how a supercapacitor works alongside a battery in regenerative braking applications. This study demonstrates that the superconductor used can deliver maximum power when required. Also, it can also withstand elevated peaks in charging or discharging current via the supercapacitor. Combining a battery with a supercapacitor reduces the abrupt load on the battery by shifting it to the capacitor. When these two combinations are used in tandem, the battery pack's endurance and lifespan are both boosted. [ABSTRACT FROM AUTHOR]