Evaluation of the Hydraulic Fracturing Tendencies of Consolidated Sandstone Reservoirs Based on the Catastrophe Theory.

The evaluation of rock hydraulic fracturing tendency plays a crucial role in the selection of fracturing layers within reservoirs and the evaluation of post-compression capacity. The sandstone reservoirs in the Yihuang New Area have poor physical properties and are deeply buried. It is necessary to increase the production of oil and gas by hydraulic fracturing. Regarding the sandstones in the region, the following parameters were considered: combined compressive strength, bulk modulus, shear modulus, fracture index, horizontal-stress difference coefficient, and fracture toughness. In accordance with the catastrophe theory, a multi-level structure was established for the hydraulic fracturing-tendency evaluation of sandstone reservoirs, consisting of a target layer, a guide layer, and an indicator layer. A catastrophic model for evaluating the hydraulic fracturing tendency of sandstone reservoirs was established. The results are consistent with those obtained from the Analytic Hierarchy Process. However, the catastrophe theory significantly reduces subjective interference. The results indicate that when the hydraulic fracturing-tendency evaluation value is greater than 0.8, the reservoir can be fractured well; when the hydraulic fracturing-tendency evaluation value is between 0.7 and 0.8, the fracture reservoir is moderate; and when the hydraulic fracturing-tendency evaluation value is less than 0.7, the fractured reservoir is poor. The optimal fracture intervals for the Yi 70 well are 1320–1323 m, 1350–1355 m, and 1355–1360 m. The optimal fracture planes for the Yi 76 well are 1921–1925 m and 1925–1930 m. The optimal fracture planes for the Yi 10-1-26 well are 2487–2495 m, 2585–2587 m, and 2589–2591 m. The hydraulic fracturing-tendency model developed in this study has been applied to several well sections of sandstone reservoirs in the Yihuang New Area. Additionally, the model was compared with existing hydraulic fracturing-tendency evaluation models. The evaluation results are in agreement with the post-pressure capacity-monitoring data. The accuracy of the model presented in this study has been verified, as has its applicability to other sandstone reservoirs. [ABSTRACT FROM AUTHOR]