Tribological and microstructural characteristics of Al2O3–LM6 semi-solid cast composite synthesized by dual mixed slurry process.

The purpose of this work is to analyze the impact of reinforced Al₂O₃–LM6 aluminum composite made with dual mixed slurry for semi-solid casting with stirring, which is documented according to microstructure and wear properties. Under dry sliding pin-on-disk conditions, the composition and surface morphology of worn surfaces were carefully examined for the 10 N applied force, 1.2 m/s sliding speed, and sliding distances up to 750 m. Experimental findings indicate that Al₂O₃ reinforcement with semi-solid dual slurry effects give outstanding resistance against the adhesive wear. Microstructure, EDS, and XRD results from worn surface evaluation all show evidence of protective layers, which helps explain the reason for the rate of wear decreased due to processing. In this experiment, LM6 serves as the matrix material and Al2O3 as reinforcement. Al₂O₃–LM6 semi-solid cast composite was created via a dual mixed slurry technique with temperature control close to the solidus line for varying compositions. This work reports a substantial relationship between metallurgical and mechanical parameters. Mechanical properties and wear characteristics have been investigated. [ABSTRACT FROM AUTHOR]