Non‐isocyanate polyurethane‐acrylate as UV‐ and thermo‐responsive plasticizer for thermoplastic elastomer.

A UV‐ and thermo‐responsive polyurethane‐acrylate prepolymer was synthesized from palm olein (POo) via a non‐isocyanate route. The process included epoxidation of POo, carbonation of epoxidized palm olein (EPOo) into polycyclic carbonate in a solvent‐free and mild condition (100°C, 1 atm), followed by reacting with ethylene diamine and acrylic acid. The chemical structure of the non‐isocyanate polyurethane‐acrylate (NIPUA) prepolymer was elucidated by 1H and 13C nuclear magnetic resonance (NMR) and Fourier transform‐infrared spectroscopy (FTIR), while weight average molecular weight of NIPUA was determined by gel permeation chromatography (GPC). The NIPUA (0–20 wt%) was incorporated with thermoplastic elastomer (TPE) as a plasticizer and cured under UV light and thermal stimulations. The cured NIPUA/TPE films were characterized by FTIR, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and tensile strength test. Under UV and thermal stimulations, the NIPUA/TPE demonstrated enhanced tensile properties (elongation at break >1280%, Young's modulus ~25 MPa), thermal properties (lower Tg), lower water contact angle, and shortened curing time as compared with the blank TPE. The 20 wt% NIPUA/TPE films exhibited susceptibility to enzymatic biodegradation and noncytotoxic to HEK 293 cells in vitro, demonstrated it's potential as a UV‐ and thermo‐responsive plasticizer for TPE in manufacturing of medical devices. [ABSTRACT FROM AUTHOR]