Multifaceted Analysis of the Thermal Properties of Shielding Cement-Based Composites with Magnetite Aggregate.

The paper presents and discusses the results of a study of the thermal properties of cement composites with different contents of magnetite aggregate (0%, 20%, 40% and 60% by volume). The effect of grain size on the evaluated thermal properties was also investigated. For this purpose, concrete containing 50% by volume of magnetite aggregate with four different fractions (1–2 mm, 2–4 mm, 4–8 mm and 8–16 mm) was used. Thermal parameters were evaluated on specimens fully saturated with water and dried to a constant mass at 65 °C. The series with varying grain sizes of magnetite achieved thermal conductivity values in the range of 2.76–3.03 W/(m·K) and 2.00–2.21 W/(m·K) at full water saturation and after drying to a constant mass, respectively. In the case of the series with 20% magnetite by volume, the thermal conductivity was 2.65 W/(m·K) and 1.99 W/(m·K) for the material fully saturated with water and dried to a constant mass, respectively. The series with a 60% volume share of magnetite obtained values of this parameter of 3.47 W/(m·K) and 2.66 W/(m·K), respectively, under the same assumptions. [ABSTRACT FROM AUTHOR]